Chrome – Matte Wild Orange VCH306

SKU: VCH306
Skladem
16 276 
Skladem

Přidat do oblíbených
Přidat do oblíbených
Přidat do oblíbených
Přidat do oblíbených
Další lidé se zajímají o tento produkt. 7 zákazník má produkt právě v košíku.
Možnosti dopravy SKU: VCH306 Kategorie:

Chrome – Matte Wild Orange VCH306 – Design matného chromu.

Role fólie návin: 18bm.Šíře 1,52m. Fólie TeckWrap prodáváme na celé role. V případě menšího množství volejte. Fólie na objednávku. Doba dodání standardně 5 dní.

Vysoce kvalitní polymerní vícevrstvá kalandrovaná vinylová fólie se stříbrným zadním povrchem a kanálky v lepidle pro uvolňování vzduchu.

 

 

Popis

Chrome – Matte Wild Orange VCH306 – Design matného chromu.

Vysoce kvalitní polymerní kalandrovaná vinylová fólie se stříbrným zadním povrchem a kanálky v lepidle pro uvolňování vzduchu.

  • Product Type: High Polymeric
  • Technology: Calendered
  • Material: PVC
  • Durability: 2-3 Years
  • Substrate: Concave and convex
  • Surface Finish: Metallic
  • Feature: Bubble Free Air Channel
  • Main use: Vehicle full wraps
  • Adhesive Type: Removable, Air Release, Repositionable
  • Application: Vehicles, Furniture, Laptop, Cell Phones, any other smooth surface
  • Placement: Bonnet, Head, Roof, Door, Internal, The Whole Car Body etc
  • Roll Size : 1.52 x 18 Meters

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater

Application method: Standard methods for calendered films. No overstretching. Post heating

Post-heating temperature: 100℃ flat surfaces, 120℃ curves, and overlaps

Cure time: 24 hours above 15℃

Aftercare: PH neutral, Avoid hot wax or solvents

The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatch

 

Implementation:

1. TeckWrap 180 series – smooth surfaces
2. TeckWrap 190 series – smooth surfaces, curved surfaces only when rules of calandered and hybrid vinyl film application are followed.

Application stages:
1. Cleaning of surface
2. Right choice of film according to its implementation
3. Technological installation

Recommended Application tools
• High density felt squeegee
• Cutter (knives with 30 and 45 degree blades). We recommend OLFA, Tajima and Samurai knives
• Professional temperature controllable heat gun
• Infrared Thermometer
• Gloves
• Felt block
• Towel

Surface cleaning rules
24 hours before installation
1. Clean the surface with soap liquid. Hand cleaning of organic and nonorganic wastes, removal of exhausted solution.
2. Clean away any petrochemical contaminates (tar, oil, grease, etc.). Use a good automotive cleaner and wax remover. Wipe down surface with isopropyl alcohol.
3. Cleaning of surface with abrasive clay to remove the rest of contamination.
4. Drying of elements. To dry the surface, use a dry cloth or paper towel. Make sure that the surface, edges, corrugations, hollows and joints of the vehicle are completely dry. Carefully remove remaining humidity under rubber seals.
Right before installation
1. Checking of surface for contaminations. Cleaning of dirt after dismantling of elements.
2. Degreasing of surface, degreasing curves and corners.
3. Cleaning of dust from the surface with sticky anti-dust clothes.

Rules of technological installation:
1. Keep the roll 24 hours in a place where it will be cut in order to climates the roll. Work with a cold film in a place with normal temperature can cause deformations on the film.

2. Wrapping must be done in clean room.

3. Moisten the room floor in winter period to minimize dust (anti-electrostatic measures).

4. The recommended temperature for wrapping is 16-18 Celsius.

5. Don’t overstretch vinyl film. We recommend not stretching any film, including textured ones, over 10%.

6. We recommend cold wrapping method with installation of calendared and hybrid films. Use dry method of application.

7. Use leeching technique on difficult surfaces.

8. Use method of relief cuts to decrease tension of vinyl film.

9. Use pre-stretch technique for wrapping of bumpers, mirrors, door handles and other curved elements.

10. Use glue promoter for surfaces with low energy and compound curves. We recommend 3M 94 and Probond.

When glue promoter is not used on compound curves we recommend wrapping in overlaps with pieces.
Please keep in mind that various automotive plastics contain in part release agents and softeners. These can be released (gas emission) when exposed to heat, e.g. through strong sunlight and there by influence the adhesive effect bubble formation of the film. Same may happen if the car surface was painted recently.

11. Post heat the surface over 100 Celsius after installation of vinyl film.

12. Apply edge sealer or transparent laminate film on edges of the film to protect them.

13. After installation one should keep the vehicle in room temperature (18-23 Celsius) for at least 24 hours.

14. Wrapped vehicle can be washed only after 7 days.

15. It is forbidden to ride under rain or snow in 48 hours after installation of vinyl film.

 

Recenze

Zatím zde nejsou žádné recenze.

Buďte první, kdo ohodnotí „Chrome – Matte Wild Orange VCH306“

Vaše e-mailová adresa nebude zveřejněna. Vyžadované informace jsou označeny *

Quick Comparison

SettingsChrome - Matte Wild Orange VCH306 removeChrome - Matte Violet Purple VCH303 removeChrome - Matte Chestnut Brown VCH309 removeChrome - Matte Sparkling Gold VCH308 removeChrome - Matte Ash Grey VCH310 removeChrome - Matte Apple Green VCH307 remove
Image
SKUVCH306VCH303VCH309VCH308VCH310VCH307
Rating
Cena16 276 16 276 16 276 16 276 16 276 16 276 
Stock
Skladem
Skladem
Skladem
Skladem
Skladem
Skladem
AvailabilitySklademSklademSklademSklademSklademSkladem
Add to cart

Přidat do košíku

Přidat do košíku

Přidat do košíku

Přidat do košíku

Přidat do košíku

Přidat do košíku

DescriptionChrome - Matte Wild Orange VCH306 - Design matného chromu. Role fólie návin: 18bm.Šíře 1,52m. Fólie TeckWrap prodáváme na celé role. V případě menšího množství volejte. Fólie na objednávku. Doba dodání standardně 5 dní. Vysoce kvalitní polymerní vícevrstvá kalandrovaná vinylová fólie se stříbrným zadním povrchem a kanálky v lepidle pro uvolňování vzduchu.    Chrome - Matte Violet Purple VCH303 - Design matného chromu. Role fólie návin: 18bm.Šíře 1,52m. Fólie TeckWrap prodáváme na celé role. V případě menšího množství volejte. Fólie na objednávku. Doba dodání standardně 5 dní. Vysoce kvalitní polymerní vícevrstvá kalandrovaná vinylová fólie se stříbrným zadním povrchem a kanálky v lepidle pro uvolňování vzduchu.    Chrome - Matte Chestnut Brown VCH309 - Design matného chromu. Role fólie návin: 18bm.Šíře 1,52m. Fólie TeckWrap prodáváme na celé role. V případě menšího množství volejte. Fólie na objednávku. Doba dodání standardně 5 dní. Vysoce kvalitní polymerní vícevrstvá kalandrovaná vinylová fólie se stříbrným zadním povrchem a kanálky v lepidle pro uvolňování vzduchu.    Chrome - Matte Sparkling Gold VCH308 - Design matného chromu. Role fólie návin: 18bm.Šíře 1,52m. Fólie TeckWrap prodáváme na celé role. V případě menšího množství volejte. Fólie na objednávku. Doba dodání standardně 5 dní. Vysoce kvalitní polymerní vícevrstvá kalandrovaná vinylová fólie se stříbrným zadním povrchem a kanálky v lepidle pro uvolňování vzduchu.    Chrome - Matte Ash Grey VCH310 - Design matného chromu. Role fólie návin: 18bm.Šíře 1,52m. Fólie TeckWrap prodáváme na celé role. V případě menšího množství volejte. Fólie na objednávku. Doba dodání standardně 5 dní. Vysoce kvalitní polymerní vícevrstvá kalandrovaná vinylová fólie se stříbrným zadním povrchem a kanálky v lepidle pro uvolňování vzduchu.    Chrome - Matte Apple Green VCH307 - Design matného chromu. Role fólie návin: 18bm.Šíře 1,52m. Fólie TeckWrap prodáváme na celé role. V případě menšího množství volejte. Fólie na objednávku. Doba dodání standardně 5 dní. Vysoce kvalitní polymerní vícevrstvá kalandrovaná vinylová fólie se stříbrným zadním povrchem a kanálky v lepidle pro uvolňování vzduchu.    
ContentChrome - Matte Wild Orange VCH306 - Design matného chromu. Vysoce kvalitní polymerní kalandrovaná vinylová fólie se stříbrným zadním povrchem a kanálky v lepidle pro uvolňování vzduchu.
  • Product Type: High Polymeric
  • Technology: Calendered
  • Material: PVC
  • Durability: 2-3 Years
  • Substrate: Concave and convex
  • Surface Finish: Metallic
  • Feature: Bubble Free Air Channel
  • Main use: Vehicle full wraps
  • Adhesive Type: Removable, Air Release, Repositionable
  • Application: Vehicles, Furniture, Laptop, Cell Phones, any other smooth surface
  • Placement: Bonnet, Head, Roof, Door, Internal, The Whole Car Body etc
  • Roll Size : 1.52 x 18 Meters
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater Application method: Standard methods for calendered films. No overstretching. Post heating Post-heating temperature: 100℃ flat surfaces, 120℃ curves, and overlaps Cure time: 24 hours above 15℃ Aftercare: PH neutral, Avoid hot wax or solvents The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatch   Implementation:
1. TeckWrap 180 series – smooth surfaces 2. TeckWrap 190 series – smooth surfaces, curved surfaces only when rules of calandered and hybrid vinyl film application are followed. Application stages: 1. Cleaning of surface 2. Right choice of film according to its implementation 3. Technological installation Recommended Application tools • High density felt squeegee • Cutter (knives with 30 and 45 degree blades). We recommend OLFA, Tajima and Samurai knives • Professional temperature controllable heat gun • Infrared Thermometer • Gloves • Felt block • Towel Surface cleaning rules 24 hours before installation 1. Clean the surface with soap liquid. Hand cleaning of organic and nonorganic wastes, removal of exhausted solution. 2. Clean away any petrochemical contaminates (tar, oil, grease, etc.). Use a good automotive cleaner and wax remover. Wipe down surface with isopropyl alcohol. 3. Cleaning of surface with abrasive clay to remove the rest of contamination. 4. Drying of elements. To dry the surface, use a dry cloth or paper towel. Make sure that the surface, edges, corrugations, hollows and joints of the vehicle are completely dry. Carefully remove remaining humidity under rubber seals. Right before installation 1. Checking of surface for contaminations. Cleaning of dirt after dismantling of elements. 2. Degreasing of surface, degreasing curves and corners. 3. Cleaning of dust from the surface with sticky anti-dust clothes. Rules of technological installation: 1. Keep the roll 24 hours in a place where it will be cut in order to climates the roll. Work with a cold film in a place with normal temperature can cause deformations on the film. 2. Wrapping must be done in clean room. 3. Moisten the room floor in winter period to minimize dust (anti-electrostatic measures). 4. The recommended temperature for wrapping is 16-18 Celsius. 5. Don’t overstretch vinyl film. We recommend not stretching any film, including textured ones, over 10%. 6. We recommend cold wrapping method with installation of calendared and hybrid films. Use dry method of application. 7. Use leeching technique on difficult surfaces. 8. Use method of relief cuts to decrease tension of vinyl film. 9. Use pre-stretch technique for wrapping of bumpers, mirrors, door handles and other curved elements. 10. Use glue promoter for surfaces with low energy and compound curves. We recommend 3M 94 and Probond. When glue promoter is not used on compound curves we recommend wrapping in overlaps with pieces. Please keep in mind that various automotive plastics contain in part release agents and softeners. These can be released (gas emission) when exposed to heat, e.g. through strong sunlight and there by influence the adhesive effect bubble formation of the film. Same may happen if the car surface was painted recently. 11. Post heat the surface over 100 Celsius after installation of vinyl film. 12. Apply edge sealer or transparent laminate film on edges of the film to protect them. 13. After installation one should keep the vehicle in room temperature (18-23 Celsius) for at least 24 hours. 14. Wrapped vehicle can be washed only after 7 days. 15. It is forbidden to ride under rain or snow in 48 hours after installation of vinyl film.  
Chrome - Matte Violet Purple VCH303 - Design matného chromu. Vysoce kvalitní polymerní kalandrovaná vinylová fólie se stříbrným zadním povrchem a kanálky v lepidle pro uvolňování vzduchu.
  • Product Type: High Polymeric
  • Technology: Calendered
  • Material: PVC
  • Durability: 2-3 Years
  • Substrate: Concave and convex
  • Surface Finish: Metallic
  • Feature: Bubble Free Air Channel
  • Main use: Vehicle full wraps
  • Adhesive Type: Removable, Air Release, Repositionable
  • Application: Vehicles, Furniture, Laptop, Cell Phones, any other smooth surface
  • Placement: Bonnet, Head, Roof, Door, Internal, The Whole Car Body etc
  • Roll Size : 1.52 x 18 Meters
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater Application method: Standard methods for calendered films. No overstretching. Post heating Post-heating temperature: 100℃ flat surfaces, 120℃ curves, and overlaps Cure time: 24 hours above 15℃ Aftercare: PH neutral, Avoid hot wax or solvents The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatch   Implementation:
1. TeckWrap 180 series – smooth surfaces 2. TeckWrap 190 series – smooth surfaces, curved surfaces only when rules of calandered and hybrid vinyl film application are followed. Application stages: 1. Cleaning of surface 2. Right choice of film according to its implementation 3. Technological installation Recommended Application tools • High density felt squeegee • Cutter (knives with 30 and 45 degree blades). We recommend OLFA, Tajima and Samurai knives • Professional temperature controllable heat gun • Infrared Thermometer • Gloves • Felt block • Towel Surface cleaning rules 24 hours before installation 1. Clean the surface with soap liquid. Hand cleaning of organic and nonorganic wastes, removal of exhausted solution. 2. Clean away any petrochemical contaminates (tar, oil, grease, etc.). Use a good automotive cleaner and wax remover. Wipe down surface with isopropyl alcohol. 3. Cleaning of surface with abrasive clay to remove the rest of contamination. 4. Drying of elements. To dry the surface, use a dry cloth or paper towel. Make sure that the surface, edges, corrugations, hollows and joints of the vehicle are completely dry. Carefully remove remaining humidity under rubber seals. Right before installation 1. Checking of surface for contaminations. Cleaning of dirt after dismantling of elements. 2. Degreasing of surface, degreasing curves and corners. 3. Cleaning of dust from the surface with sticky anti-dust clothes. Rules of technological installation: 1. Keep the roll 24 hours in a place where it will be cut in order to climates the roll. Work with a cold film in a place with normal temperature can cause deformations on the film. 2. Wrapping must be done in clean room. 3. Moisten the room floor in winter period to minimize dust (anti-electrostatic measures). 4. The recommended temperature for wrapping is 16-18 Celsius. 5. Don’t overstretch vinyl film. We recommend not stretching any film, including textured ones, over 10%. 6. We recommend cold wrapping method with installation of calendared and hybrid films. Use dry method of application. 7. Use leeching technique on difficult surfaces. 8. Use method of relief cuts to decrease tension of vinyl film. 9. Use pre-stretch technique for wrapping of bumpers, mirrors, door handles and other curved elements. 10. Use glue promoter for surfaces with low energy and compound curves. We recommend 3M 94 and Probond. When glue promoter is not used on compound curves we recommend wrapping in overlaps with pieces. Please keep in mind that various automotive plastics contain in part release agents and softeners. These can be released (gas emission) when exposed to heat, e.g. through strong sunlight and there by influence the adhesive effect bubble formation of the film. Same may happen if the car surface was painted recently. 11. Post heat the surface over 100 Celsius after installation of vinyl film. 12. Apply edge sealer or transparent laminate film on edges of the film to protect them. 13. After installation one should keep the vehicle in room temperature (18-23 Celsius) for at least 24 hours. 14. Wrapped vehicle can be washed only after 7 days. 15. It is forbidden to ride under rain or snow in 48 hours after installation of vinyl film.  
Chrome - Matte Chestnut Brown VCH309 - Design matného chromu. Vysoce kvalitní polymerní kalandrovaná vinylová fólie se stříbrným zadním povrchem a kanálky v lepidle pro uvolňování vzduchu.
  • Product Type: High Polymeric
  • Technology: Calendered
  • Material: PVC
  • Durability: 2-3 Years
  • Substrate: Concave and convex
  • Surface Finish: Metallic
  • Feature: Bubble Free Air Channel
  • Main use: Vehicle full wraps
  • Adhesive Type: Removable, Air Release, Repositionable
  • Application: Vehicles, Furniture, Laptop, Cell Phones, any other smooth surface
  • Placement: Bonnet, Head, Roof, Door, Internal, The Whole Car Body etc
  • Roll Size : 1.52 x 18 Meters
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater Application method: Standard methods for calendered films. No overstretching. Post heating Post-heating temperature: 100℃ flat surfaces, 120℃ curves, and overlaps Cure time: 24 hours above 15℃ Aftercare: PH neutral, Avoid hot wax or solvents The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatch   Implementation:
1. TeckWrap 180 series – smooth surfaces 2. TeckWrap 190 series – smooth surfaces, curved surfaces only when rules of calandered and hybrid vinyl film application are followed. Application stages: 1. Cleaning of surface 2. Right choice of film according to its implementation 3. Technological installation Recommended Application tools • High density felt squeegee • Cutter (knives with 30 and 45 degree blades). We recommend OLFA, Tajima and Samurai knives • Professional temperature controllable heat gun • Infrared Thermometer • Gloves • Felt block • Towel Surface cleaning rules 24 hours before installation 1. Clean the surface with soap liquid. Hand cleaning of organic and nonorganic wastes, removal of exhausted solution. 2. Clean away any petrochemical contaminates (tar, oil, grease, etc.). Use a good automotive cleaner and wax remover. Wipe down surface with isopropyl alcohol. 3. Cleaning of surface with abrasive clay to remove the rest of contamination. 4. Drying of elements. To dry the surface, use a dry cloth or paper towel. Make sure that the surface, edges, corrugations, hollows and joints of the vehicle are completely dry. Carefully remove remaining humidity under rubber seals. Right before installation 1. Checking of surface for contaminations. Cleaning of dirt after dismantling of elements. 2. Degreasing of surface, degreasing curves and corners. 3. Cleaning of dust from the surface with sticky anti-dust clothes. Rules of technological installation: 1. Keep the roll 24 hours in a place where it will be cut in order to climates the roll. Work with a cold film in a place with normal temperature can cause deformations on the film. 2. Wrapping must be done in clean room. 3. Moisten the room floor in winter period to minimize dust (anti-electrostatic measures). 4. The recommended temperature for wrapping is 16-18 Celsius. 5. Don’t overstretch vinyl film. We recommend not stretching any film, including textured ones, over 10%. 6. We recommend cold wrapping method with installation of calendared and hybrid films. Use dry method of application. 7. Use leeching technique on difficult surfaces. 8. Use method of relief cuts to decrease tension of vinyl film. 9. Use pre-stretch technique for wrapping of bumpers, mirrors, door handles and other curved elements. 10. Use glue promoter for surfaces with low energy and compound curves. We recommend 3M 94 and Probond. When glue promoter is not used on compound curves we recommend wrapping in overlaps with pieces. Please keep in mind that various automotive plastics contain in part release agents and softeners. These can be released (gas emission) when exposed to heat, e.g. through strong sunlight and there by influence the adhesive effect bubble formation of the film. Same may happen if the car surface was painted recently. 11. Post heat the surface over 100 Celsius after installation of vinyl film. 12. Apply edge sealer or transparent laminate film on edges of the film to protect them. 13. After installation one should keep the vehicle in room temperature (18-23 Celsius) for at least 24 hours. 14. Wrapped vehicle can be washed only after 7 days. 15. It is forbidden to ride under rain or snow in 48 hours after installation of vinyl film.  
Chrome - Matte Sparkling Gold VCH308 - Design matného chromu. Vysoce kvalitní polymerní kalandrovaná vinylová fólie se stříbrným zadním povrchem a kanálky v lepidle pro uvolňování vzduchu.
  • Product Type: High Polymeric
  • Technology: Calendered
  • Material: PVC
  • Durability: 2-3 Years
  • Substrate: Concave and convex
  • Surface Finish: Metallic
  • Feature: Bubble Free Air Channel
  • Main use: Vehicle full wraps
  • Adhesive Type: Removable, Air Release, Repositionable
  • Application: Vehicles, Furniture, Laptop, Cell Phones, any other smooth surface
  • Placement: Bonnet, Head, Roof, Door, Internal, The Whole Car Body etc
  • Roll Size : 1.52 x 18 Meters
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater Application method: Standard methods for calendered films. No overstretching. Post heating Post-heating temperature: 100℃ flat surfaces, 120℃ curves, and overlaps Cure time: 24 hours above 15℃ Aftercare: PH neutral, Avoid hot wax or solvents The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatch   Implementation:
1. TeckWrap 180 series – smooth surfaces 2. TeckWrap 190 series – smooth surfaces, curved surfaces only when rules of calandered and hybrid vinyl film application are followed. Application stages: 1. Cleaning of surface 2. Right choice of film according to its implementation 3. Technological installation Recommended Application tools • High density felt squeegee • Cutter (knives with 30 and 45 degree blades). We recommend OLFA, Tajima and Samurai knives • Professional temperature controllable heat gun • Infrared Thermometer • Gloves • Felt block • Towel Surface cleaning rules 24 hours before installation 1. Clean the surface with soap liquid. Hand cleaning of organic and nonorganic wastes, removal of exhausted solution. 2. Clean away any petrochemical contaminates (tar, oil, grease, etc.). Use a good automotive cleaner and wax remover. Wipe down surface with isopropyl alcohol. 3. Cleaning of surface with abrasive clay to remove the rest of contamination. 4. Drying of elements. To dry the surface, use a dry cloth or paper towel. Make sure that the surface, edges, corrugations, hollows and joints of the vehicle are completely dry. Carefully remove remaining humidity under rubber seals. Right before installation 1. Checking of surface for contaminations. Cleaning of dirt after dismantling of elements. 2. Degreasing of surface, degreasing curves and corners. 3. Cleaning of dust from the surface with sticky anti-dust clothes. Rules of technological installation: 1. Keep the roll 24 hours in a place where it will be cut in order to climates the roll. Work with a cold film in a place with normal temperature can cause deformations on the film. 2. Wrapping must be done in clean room. 3. Moisten the room floor in winter period to minimize dust (anti-electrostatic measures). 4. The recommended temperature for wrapping is 16-18 Celsius. 5. Don’t overstretch vinyl film. We recommend not stretching any film, including textured ones, over 10%. 6. We recommend cold wrapping method with installation of calendared and hybrid films. Use dry method of application. 7. Use leeching technique on difficult surfaces. 8. Use method of relief cuts to decrease tension of vinyl film. 9. Use pre-stretch technique for wrapping of bumpers, mirrors, door handles and other curved elements. 10. Use glue promoter for surfaces with low energy and compound curves. We recommend 3M 94 and Probond. When glue promoter is not used on compound curves we recommend wrapping in overlaps with pieces. Please keep in mind that various automotive plastics contain in part release agents and softeners. These can be released (gas emission) when exposed to heat, e.g. through strong sunlight and there by influence the adhesive effect bubble formation of the film. Same may happen if the car surface was painted recently. 11. Post heat the surface over 100 Celsius after installation of vinyl film. 12. Apply edge sealer or transparent laminate film on edges of the film to protect them. 13. After installation one should keep the vehicle in room temperature (18-23 Celsius) for at least 24 hours. 14. Wrapped vehicle can be washed only after 7 days. 15. It is forbidden to ride under rain or snow in 48 hours after installation of vinyl film.  
Chrome - Matte Ash Grey VCH310 - Design matného chromu. Vysoce kvalitní polymerní kalandrovaná vinylová fólie se stříbrným zadním povrchem a kanálky v lepidle pro uvolňování vzduchu.
  • Product Type: High Polymeric
  • Technology: Calendered
  • Material: PVC
  • Durability: 2-3 Years
  • Substrate: Concave and convex
  • Surface Finish: Metallic
  • Feature: Bubble Free Air Channel
  • Main use: Vehicle full wraps
  • Adhesive Type: Removable, Air Release, Repositionable
  • Application: Vehicles, Furniture, Laptop, Cell Phones, any other smooth surface
  • Placement: Bonnet, Head, Roof, Door, Internal, The Whole Car Body etc
  • Roll Size : 1.52 x 18 Meters
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater Application method: Standard methods for calendered films. No overstretching. Post heating Post-heating temperature: 100℃ flat surfaces, 120℃ curves, and overlaps Cure time: 24 hours above 15℃ Aftercare: PH neutral, Avoid hot wax or solvents The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatch   Implementation:
1. TeckWrap 180 series – smooth surfaces 2. TeckWrap 190 series – smooth surfaces, curved surfaces only when rules of calandered and hybrid vinyl film application are followed. Application stages: 1. Cleaning of surface 2. Right choice of film according to its implementation 3. Technological installation Recommended Application tools • High density felt squeegee • Cutter (knives with 30 and 45 degree blades). We recommend OLFA, Tajima and Samurai knives • Professional temperature controllable heat gun • Infrared Thermometer • Gloves • Felt block • Towel Surface cleaning rules 24 hours before installation 1. Clean the surface with soap liquid. Hand cleaning of organic and nonorganic wastes, removal of exhausted solution. 2. Clean away any petrochemical contaminates (tar, oil, grease, etc.). Use a good automotive cleaner and wax remover. Wipe down surface with isopropyl alcohol. 3. Cleaning of surface with abrasive clay to remove the rest of contamination. 4. Drying of elements. To dry the surface, use a dry cloth or paper towel. Make sure that the surface, edges, corrugations, hollows and joints of the vehicle are completely dry. Carefully remove remaining humidity under rubber seals. Right before installation 1. Checking of surface for contaminations. Cleaning of dirt after dismantling of elements. 2. Degreasing of surface, degreasing curves and corners. 3. Cleaning of dust from the surface with sticky anti-dust clothes. Rules of technological installation: 1. Keep the roll 24 hours in a place where it will be cut in order to climates the roll. Work with a cold film in a place with normal temperature can cause deformations on the film. 2. Wrapping must be done in clean room. 3. Moisten the room floor in winter period to minimize dust (anti-electrostatic measures). 4. The recommended temperature for wrapping is 16-18 Celsius. 5. Don’t overstretch vinyl film. We recommend not stretching any film, including textured ones, over 10%. 6. We recommend cold wrapping method with installation of calendared and hybrid films. Use dry method of application. 7. Use leeching technique on difficult surfaces. 8. Use method of relief cuts to decrease tension of vinyl film. 9. Use pre-stretch technique for wrapping of bumpers, mirrors, door handles and other curved elements. 10. Use glue promoter for surfaces with low energy and compound curves. We recommend 3M 94 and Probond. When glue promoter is not used on compound curves we recommend wrapping in overlaps with pieces. Please keep in mind that various automotive plastics contain in part release agents and softeners. These can be released (gas emission) when exposed to heat, e.g. through strong sunlight and there by influence the adhesive effect bubble formation of the film. Same may happen if the car surface was painted recently. 11. Post heat the surface over 100 Celsius after installation of vinyl film. 12. Apply edge sealer or transparent laminate film on edges of the film to protect them. 13. After installation one should keep the vehicle in room temperature (18-23 Celsius) for at least 24 hours. 14. Wrapped vehicle can be washed only after 7 days. 15. It is forbidden to ride under rain or snow in 48 hours after installation of vinyl film.  
Chrome - Matte Apple Green VCH307 - Design matného chromu. Vysoce kvalitní polymerní kalandrovaná vinylová fólie se stříbrným zadním povrchem a kanálky v lepidle pro uvolňování vzduchu.
  • Product Type: High Polymeric
  • Technology: Calendered
  • Material: PVC
  • Durability: 2-3 Years
  • Substrate: Concave and convex
  • Surface Finish: Metallic
  • Feature: Bubble Free Air Channel
  • Main use: Vehicle full wraps
  • Adhesive Type: Removable, Air Release, Repositionable
  • Application: Vehicles, Furniture, Laptop, Cell Phones, any other smooth surface
  • Placement: Bonnet, Head, Roof, Door, Internal, The Whole Car Body etc
  • Roll Size : 1.52 x 18 Meters
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater Application method: Standard methods for calendered films. No overstretching. Post heating Post-heating temperature: 100℃ flat surfaces, 120℃ curves, and overlaps Cure time: 24 hours above 15℃ Aftercare: PH neutral, Avoid hot wax or solvents The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatch   Implementation:
1. TeckWrap 180 series – smooth surfaces 2. TeckWrap 190 series – smooth surfaces, curved surfaces only when rules of calandered and hybrid vinyl film application are followed. Application stages: 1. Cleaning of surface 2. Right choice of film according to its implementation 3. Technological installation Recommended Application tools • High density felt squeegee • Cutter (knives with 30 and 45 degree blades). We recommend OLFA, Tajima and Samurai knives • Professional temperature controllable heat gun • Infrared Thermometer • Gloves • Felt block • Towel Surface cleaning rules 24 hours before installation 1. Clean the surface with soap liquid. Hand cleaning of organic and nonorganic wastes, removal of exhausted solution. 2. Clean away any petrochemical contaminates (tar, oil, grease, etc.). Use a good automotive cleaner and wax remover. Wipe down surface with isopropyl alcohol. 3. Cleaning of surface with abrasive clay to remove the rest of contamination. 4. Drying of elements. To dry the surface, use a dry cloth or paper towel. Make sure that the surface, edges, corrugations, hollows and joints of the vehicle are completely dry. Carefully remove remaining humidity under rubber seals. Right before installation 1. Checking of surface for contaminations. Cleaning of dirt after dismantling of elements. 2. Degreasing of surface, degreasing curves and corners. 3. Cleaning of dust from the surface with sticky anti-dust clothes. Rules of technological installation: 1. Keep the roll 24 hours in a place where it will be cut in order to climates the roll. Work with a cold film in a place with normal temperature can cause deformations on the film. 2. Wrapping must be done in clean room. 3. Moisten the room floor in winter period to minimize dust (anti-electrostatic measures). 4. The recommended temperature for wrapping is 16-18 Celsius. 5. Don’t overstretch vinyl film. We recommend not stretching any film, including textured ones, over 10%. 6. We recommend cold wrapping method with installation of calendared and hybrid films. Use dry method of application. 7. Use leeching technique on difficult surfaces. 8. Use method of relief cuts to decrease tension of vinyl film. 9. Use pre-stretch technique for wrapping of bumpers, mirrors, door handles and other curved elements. 10. Use glue promoter for surfaces with low energy and compound curves. We recommend 3M 94 and Probond. When glue promoter is not used on compound curves we recommend wrapping in overlaps with pieces. Please keep in mind that various automotive plastics contain in part release agents and softeners. These can be released (gas emission) when exposed to heat, e.g. through strong sunlight and there by influence the adhesive effect bubble formation of the film. Same may happen if the car surface was painted recently. 11. Post heat the surface over 100 Celsius after installation of vinyl film. 12. Apply edge sealer or transparent laminate film on edges of the film to protect them. 13. After installation one should keep the vehicle in room temperature (18-23 Celsius) for at least 24 hours. 14. Wrapped vehicle can be washed only after 7 days. 15. It is forbidden to ride under rain or snow in 48 hours after installation of vinyl film.  
Weight
Dimensions------
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Cena
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare