TeckWrap USA wrapping fólie Zircon blue RB24

SKU: RB24
Skladem
18 600 
Skladem

Přidat do oblíbených
Přidat do oblíbených
Přidat do oblíbených
Přidat do oblíbených
Další lidé se zajímají o tento produkt. 20 zákazník má produkt právě v košíku.
Možnosti dopravy SKU: RB24 Kategorie: Štítky:
TeckWrap USA wrapping fólie Zircon blue RB24

Role fólie návin: 18bm.Šíře 1,52m. Fólie TeckWrap prodáváme na celé role. V případě menšího množství volejte. Fólie na objednávku. Doba dodání standardně 5 dní.

Popis

TeckWrap USA wrapping fólie Zircon blue RB24

Conformable material with stable color pigments. Suitable for full car wrapping (or any other smooth or curved surface). Comes in 25 gloss colors

Thickness of film (mm): 0.17-0.19mm

Thickness of film with release liner: 0.34-0.35mm

Type of film: High grade polymeric multilayered calendared vinyl film with air release channels

 

Width & Length: 1.52m*18m (59.8″* 708,6″, 4.98ft*59ft, 1.66yd* 19,6yd)

Series: 190 series

Adhesive: Solvent polyacrylate

Adhesive performance properties: (1mil adhesive on 1mil material, bonded to stainless steel panel)

180°Peel (PSTC-101), 20 minute bond – 2.2 lb/inch, 24 hour bond – 3.5 lb/inch

Release liner: Kraft white silicone-coated, paper with double-sided polyethylene coating

Storing period (shelf life): 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sun light, clean and dry place

Avg. indoor life: 4 years when followed rules of application and usage

Avg. outdoor life: 3 years when followed rules of application and use

Application: from +17°С to +25°С, usage from -55°С to +65°С

Dimensional stability: shrinkage less than 4%

Plastification: between 27%-35%

Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average)

Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005,

Test result: 5

Exposure cycle: ASTM D4329-13 cycle A,

Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 49h

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater

Application method: Standard methods for calendered films. No overstretching. Post heating

Post-heating temperature: 110℃ flat surfaces, 130℃ curves, and overlaps

Cure time: 24 hours above 10℃

Aftercare: PH neutral, Avoid wax or solvents

The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatch.

Recenze

Zatím zde nejsou žádné recenze.

Buďte první, kdo ohodnotí „TeckWrap USA wrapping fólie Zircon blue RB24“

Vaše e-mailová adresa nebude zveřejněna. Vyžadované informace jsou označeny *

Quick Comparison

SettingsTeckWrap USA wrapping fólie Zircon blue RB24 removeCaribbean blue RB09 removeAsh grey RB13 removeTeckWrap USA wrapping fólie Kelly green RB22 removeOcean wave RB06 removeSea Turquoise RB16 remove
Image
SKURB24RB09RB13RB2RB06RB6
Rating
Cena18 600 18 600 18 600 18 600 18 600 18 600 
Stock
Skladem
Skladem
Skladem
Skladem
Skladem
Skladem
AvailabilitySklademSklademSklademSklademSklademSkladem
Add to cart

Přidat do košíku

Přidat do košíku

Přidat do košíku

Přidat do košíku

Přidat do košíku

Přidat do košíku

Description
TeckWrap USA wrapping fólie Zircon blue RB24
Role fólie návin: 18bm.Šíře 1,52m. Fólie TeckWrap prodáváme na celé role. V případě menšího množství volejte. Fólie na objednávku. Doba dodání standardně 5 dní.
Role fólie návin: 18bm.Šíře 1,52m. Fólie TeckWrap prodáváme na celé role. V případě menšího množství volejte. Fólie na objednávku. Doba dodání standardně 5 dní.Role fólie návin: 18bm.Šíře 1,52m. Fólie TeckWrap prodáváme na celé role. V případě menšího množství volejte. Fólie na objednávku. Doba dodání standardně 5 dní.
TeckWrap USA wrapping fólie Kelly green RB22
Role fólie návin: 18bm.Šíře 1,52m. Fólie TeckWrap prodáváme na celé role. V případě menšího množství volejte. Fólie na objednávku. Doba dodání standardně 5 dní.
Role fólie návin: 18bm.Šíře 1,52m. Fólie TeckWrap prodáváme na celé role. V případě menšího množství volejte. Fólie na objednávku. Doba dodání standardně 5 dní.Role fólie návin: 18bm.Šíře 1,52m. Fólie TeckWrap prodáváme na celé role. V případě menšího množství volejte. Fólie na objednávku. Doba dodání standardně 5 dní.
Content
TeckWrap USA wrapping fólie Zircon blue RB24
Conformable material with stable color pigments. Suitable for full car wrapping (or any other smooth or curved surface). Comes in 25 gloss colors Thickness of film (mm): 0.17-0.19mm Thickness of film with release liner: 0.34-0.35mm Type of film: High grade polymeric multilayered calendared vinyl film with air release channels   Width & Length: 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd) Series: 190 series Adhesive: Solvent polyacrylate Adhesive performance properties: (1mil adhesive on 1mil material, bonded to stainless steel panel) 180°Peel (PSTC-101), 20 minute bond – 2.2 lb/inch, 24 hour bond – 3.5 lb/inch Release liner: Kraft white silicone-coated, paper with double-sided polyethylene coating Storing period (shelf life): 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sun light, clean and dry place Avg. indoor life: 4 years when followed rules of application and usage Avg. outdoor life: 3 years when followed rules of application and use Application: from +17°С to +25°С, usage from -55°С to +65°С Dimensional stability: shrinkage less than 4% Plastification: between 27%-35% Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average) Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 5 Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 49h Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater Application method: Standard methods for calendered films. No overstretching. Post heating Post-heating temperature: 110℃ flat surfaces, 130℃ curves, and overlaps Cure time: 24 hours above 10℃ Aftercare: PH neutral, Avoid wax or solvents The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatch.
DESCRIPTION Conformable material with stable color pigments. Suitable for full car wrapping (or any other smooth or curved surface). Comes in 25 gloss colors Thickness of film (mm): 0.17-0.19mm Thickness of film with release liner: 0.34-0.35mm Type of film: High grade polymeric multilayered calendared vinyl film with air release channels Colors: Fierce red, Deep blue, Rosaline Pearl, Passionate purple, Passionate purple, Grandeur Plum, Ocean wave, Acid lime, Coral peach, Caribbean blue, Amber brown, Silver chromium, Silver chromium, Dark platinum, Ash grey, Crystal Silver, Columbia blue, Sea Turquoise, Cerulean blue, Ocean green, Deep Orange, Midnight purple, Mexican pink, Kelly green, Mustard yellow, Zircon blue, Yellow gold Width & Length: 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd) Series: 190 series Adhesive: Solvent polyacrylate Adhesive performance properties: (1mil adhesive on 1mil material, bonded to stainless steel panel) 180°Peel (PSTC-101), 20 minute bond – 2.2 lb/inch, 24 hour bond – 3.5 lb/inch Release liner: Kraft white silicone-coated, paper with double-sided polyethylene coating Storing period (shelf life): 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sun light, clean and dry place Avg. indoor life: 4 years when followed rules of application and usage Avg. outdoor life: 3 years when followed rules of application and use Application: from +17°С to +25°С, usage from -55°С to +65°С Dimensional stability: shrinkage less than 4% Plastification: between 27%-35% Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average) Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 5 Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 49h Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater Application method: Standard methods for calendered films. No overstretching. Post heating Post-heating temperature: 110℃ flat surfaces, 130℃ curves, and overlaps Cure time: 24 hours above 10℃ Aftercare: PH neutral, Avoid wax or solvents The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatch.DESCRIPTION Conformable material with stable color pigments. Suitable for full car wrapping (or any other smooth or curved surface). Comes in 25 gloss colors Thickness of film (mm): 0.17-0.19mm Thickness of film with release liner: 0.34-0.35mm Type of film: High grade polymeric multilayered calendared vinyl film with air release channels Colors: Fierce red, Deep blue, Rosaline Pearl, Passionate purple, Passionate purple, Grandeur Plum, Ocean wave, Acid lime, Coral peach, Caribbean blue, Amber brown, Silver chromium, Silver chromium, Dark platinum, Ash grey, Crystal Silver, Columbia blue, Sea Turquoise, Cerulean blue, Ocean green, Deep Orange, Midnight purple, Mexican pink, Kelly green, Mustard yellow, Zircon blue, Yellow gold Width & Length: 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd) Series: 190 series Adhesive: Solvent polyacrylate Adhesive performance properties: (1mil adhesive on 1mil material, bonded to stainless steel panel) 180°Peel (PSTC-101), 20 minute bond – 2.2 lb/inch, 24 hour bond – 3.5 lb/inch Release liner: Kraft white silicone-coated, paper with double-sided polyethylene coating Storing period (shelf life): 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sun light, clean and dry place Avg. indoor life: 4 years when followed rules of application and usage Avg. outdoor life: 3 years when followed rules of application and use Application: from +17°С to +25°С, usage from -55°С to +65°С Dimensional stability: shrinkage less than 4% Plastification: between 27%-35% Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average) Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 5 Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 49h Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater Application method: Standard methods for calendered films. No overstretching. Post heating Post-heating temperature: 110℃ flat surfaces, 130℃ curves, and overlaps Cure time: 24 hours above 10℃ Aftercare: PH neutral, Avoid wax or solvents The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatch.
TeckWrap USA wrapping fólie Kelly green RB22
Conformable material with stable color pigments. Suitable for full car wrapping (or any other smooth or curved surface). Comes in 25 gloss colors Thickness of film (mm): 0.17-0.19mm Thickness of film with release liner: 0.34-0.35mm Type of film: High grade polymeric multilayered calendared vinyl film with air release channels Colors: Fierce red, Deep blue, Rosaline Pearl, Passionate purple, Passionate purple, Grandeur Plum, Ocean wave, Acid lime, Coral peach, Caribbean blue, Amber brown, Silver chromium, Silver chromium, Dark platinum, Ash grey, Crystal Silver, Columbia blue, Sea Turquoise, Cerulean blue, Ocean green, Deep Orange, Midnight purple, Mexican pink, Kelly green, Mustard yellow, Zircon blue, Yellow gold Width & Length: 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd) Series: 190 series Adhesive: Solvent polyacrylate Adhesive performance properties: (1mil adhesive on 1mil material, bonded to stainless steel panel) 180°Peel (PSTC-101), 20 minute bond – 2.2 lb/inch, 24 hour bond – 3.5 lb/inch Release liner: Kraft white silicone-coated, paper with double-sided polyethylene coating Storing period (shelf life): 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sun light, clean and dry place  
DESCRIPTION Conformable material with stable color pigments. Suitable for full car wrapping (or any other smooth or curved surface). Comes in 25 gloss colors Thickness of film (mm): 0.17-0.19mm Thickness of film with release liner: 0.34-0.35mm Type of film: High grade polymeric multilayered calendared vinyl film with air release channels Colors: Fierce red, Deep blue, Rosaline Pearl, Passionate purple, Passionate purple, Grandeur Plum, Ocean wave, Acid lime, Coral peach, Caribbean blue, Amber brown, Silver chromium, Silver chromium, Dark platinum, Ash grey, Crystal Silver, Columbia blue, Sea Turquoise, Cerulean blue, Ocean green, Deep Orange, Midnight purple, Mexican pink, Kelly green, Mustard yellow, Zircon blue, Yellow gold Width & Length: 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd) Series: 190 series Adhesive: Solvent polyacrylate Adhesive performance properties: (1mil adhesive on 1mil material, bonded to stainless steel panel) 180°Peel (PSTC-101), 20 minute bond – 2.2 lb/inch, 24 hour bond – 3.5 lb/inch Release liner: Kraft white silicone-coated, paper with double-sided polyethylene coating Storing period (shelf life): 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sun light, clean and dry place Avg. indoor life: 4 years when followed rules of application and usage Avg. outdoor life: 3 years when followed rules of application and use Application: from +17°С to +25°С, usage from -55°С to +65°С Dimensional stability: shrinkage less than 4% Plastification: between 27%-35% Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average) Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 5 Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 49h Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater Application method: Standard methods for calendered films. No overstretching. Post heating Post-heating temperature: 110℃ flat surfaces, 130℃ curves, and overlaps Cure time: 24 hours above 10℃ Aftercare: PH neutral, Avoid wax or solvents The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatch.DESCRIPTION Conformable material with stable color pigments. Suitable for full car wrapping (or any other smooth or curved surface). Comes in 25 gloss colors Thickness of film (mm): 0.17-0.19mm Thickness of film with release liner: 0.34-0.35mm Type of film: High grade polymeric multilayered calendared vinyl film with air release channels Colors: Fierce red, Deep blue, Rosaline Pearl, Passionate purple, Passionate purple, Grandeur Plum, Ocean wave, Acid lime, Coral peach, Caribbean blue, Amber brown, Silver chromium, Silver chromium, Dark platinum, Ash grey, Crystal Silver, Columbia blue, Sea Turquoise, Cerulean blue, Ocean green, Deep Orange, Midnight purple, Mexican pink, Kelly green, Mustard yellow, Zircon blue, Yellow gold Width & Length: 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd) Series: 190 series Adhesive: Solvent polyacrylate Adhesive performance properties: (1mil adhesive on 1mil material, bonded to stainless steel panel) 180°Peel (PSTC-101), 20 minute bond – 2.2 lb/inch, 24 hour bond – 3.5 lb/inch Release liner: Kraft white silicone-coated, paper with double-sided polyethylene coating Storing period (shelf life): 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sun light, clean and dry place Avg. indoor life: 4 years when followed rules of application and usage Avg. outdoor life: 3 years when followed rules of application and use Application: from +17°С to +25°С, usage from -55°С to +65°С Dimensional stability: shrinkage less than 4% Plastification: between 27%-35% Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average) Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 5 Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 49h Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater Application method: Standard methods for calendered films. No overstretching. Post heating Post-heating temperature: 110℃ flat surfaces, 130℃ curves, and overlaps Cure time: 24 hours above 10℃ Aftercare: PH neutral, Avoid wax or solvents The images, colors, and finishes on screen are approximate. For the real representation of the product always check the color swatch.
Weight
Dimensions------
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Cena
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare